The stainless steel elevator door pocket has good metallic luster and reflective effect, the brushed stainless steel door pocket has Matt reflective effect, and the mirror stainless steel door pocket has mirror like reflective effect. This Gaoli door industry is incomparable with wood door jambs, which is also the reason why the hotel industry adopts stainless steel door jambs, which have metal elements. In many places, it is said that the door jambs are inclined to attract money.

石塑線條的出現，為綠色生活帶來了很大的好處，而且石塑線條用在裝修設計中，相比*的大理石不易劃傷，而且還方便除塵，而且石塑線條的便面是經過石塑處理的，座椅大理石線條的表面*加的環保、防火、防水等，而且整體的視覺感官給人時尚華麗、大氣的效果。

The appearance of stone plastic lines has brought great benefits to green life. Moreover, stone plastic lines are used in decoration design. Compared with * marble, they are not easy to be scratched, and they are also convenient for dust removal. Moreover, the convenient surface of stone plastic lines is treated with stone plastic. The surface of marble lines of seats is more environmentally friendly, fireproof and waterproof, and the overall visual sense gives a fashionable, gorgeous and atmospheric effect.

電梯門套的要求：

Requirements for elevator door pocket:

安全：作為公眾場合進出人群密集之處，安全問題是重中之重。電梯門套一定要達到受破壞力撞擊后破裂損壞無安全隱患，甚至脫落不至于危害或損壞生命財產（這類新聞日益增多）。

Safety: as a place where people go in and out of public places, safety is the top priority. The elevator door pocket must be broken and damaged after being hit by destructive force without potential safety hazard, or even fall off without endangering or damaging life and property (such news is increasing day by day).

使用壽命：作為公眾設施，每天出入電梯人員/貨物等眾多，會對電梯門套造成很大的損傷和磨擦。對于電梯門套的材質需達到*高標準要求，以提高其使用壽命，電梯的使用壽命不少于16年，門套作為其組成部分，應盡量達到與電梯同壽命使用。

Service life: as a public facility, there are many people / goods entering and leaving the elevator every day, which will cause great damage and friction to the elevator door pocket. The material of the elevator door pocket shall meet the requirements of * high standard to improve its service life. The service life of the elevator shall not be less than 16 years. As a component of the elevator door pocket, it shall try to reach the same service life as the elevator.

常見的不銹鋼電梯拉絲門套主要有豎邊與橫邊90度拼角和橫邊與豎邊45度拼角兩種款式，*種款式線條很直，現場拼接非常方便，這也是常用的一款，后面的款式因為沒有轉折處，所以整個門套看起整體如一。

The common stainless steel elevator wire drawing door pocket mainly has two styles: the 90 degree angle between the vertical edge and the horizontal edge and the 45 degree angle between the horizontal edge and the vertical edge. The * style has straight lines and is very convenient for on-site splicing. This is also a commonly used one. The later style has no turning point, so the whole door pocket looks like one.

電梯門套的要求：

Requirements for elevator door pocket:

抗撞擊強度：電梯轎廂門在《GB7588-2003》中規定要求在5cm*5cm的范圍內，靜力300N、撞擊力1000N（約等于正常成年人所能施加的作用力，那么作為電梯門套應具備同等耐撞擊程度，以防止提重物、或電動車、自行車等進出電梯時撞擊發生損壞和意外。

Impact strength: the elevator car door is required to be within the range of 5cm * 5cm in GB7588-2003, with a static force of 300N and an impact force of 1000N (about equal to the force that can be applied by normal adults), so the elevator door sleeve shall have the same impact resistance to prevent damage and accident caused by impact when lifting heavy objects, electric vehicles, bicycles, etc. enter and exit the elevator.

防水阻燃：電梯為特種設備，在火災情況下電梯是不允許使用的，但是電梯門套作為樓梯廳內重要部分，一定要達到相應阻燃要求（V0或以上），從而提高整體的消防等級；同理，若遭遇潮濕環境或被水泡情況，需達到浸水中泡**不開裂，以增強整體環境的安全性。

Waterproof and flame retardant: the elevator is a special equipment, which is not allowed to be used in case of fire. However, as an important part of the staircase, the elevator door pocket must meet the corresponding flame retardant requirements (V0 or above), so as to improve the overall fire protection level; Similarly, in case of wet environment or blistering, it is necessary to ensure that the bubble * * does not crack when immersed in water, so as to enhance the safety of the overall environment.

在安裝電梯門套的側板和線條時，要保證至少有兩個掛件作為支撐件，安裝角鋼的位置要丈量準確，在中間增加一個加固點的點位。

When installing the side plates and lines of the elevator door pocket, it is required to ensure that there are at least two hangers as the supports. The position of the installation angle steel shall be measured accurately, and a point of reinforcement point shall be added in the middle.

裝配式電梯門套的安裝是十分麻煩的，施工完成之后再重新拆卸是十分麻煩且費力的事情，只能采用填充的方法來進行解決。

The installation of the assembled elevator door pocket is very troublesome, and it is very troublesome and laborious to disassemble it again after the construction is completed. It can only be solved by filling.

以上就是為大家介紹的有電梯不銹鋼門套的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://m.jn0539.com

The above is the detailed introduction of the stainless steel door cover of the elevator. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://m.jn0539.com